ENSIS WALTZ AIR

Impossibly thin. Impressively fast. We’ve reduced the thickness of the submerged portion of our new High Modulus Prepreg Carbon masts by over 15% compared to our standard Carbon masts, while also increasing both bending and torsional stiffness. The HM80 favours disciplines without wind power - prone surf, pump and downwind. The shorter chord length over the entire mast length reduces drag and increases manoeuvrability. This delivers more glide, more efficient pumping, and quicker turns. The HM85 covers all disciplines, with a focus on wing-foiling. Wind-powered disciplines require edging against the wind to create forward drive. Some of this drive comes from the front wing, and some comes from the mast. To efficiently provide this drive, the chord length in the submerged part of the mast is slightly longer. It increases near the top of the mast to maximise stiffness with no drag penalty, as this part of the mast is clear of the water once on foil. A more efficient underwater body shape means less drag and, hence, high and easier-to-reach top-end speed. Ventilation on the mast is now a thing of the past. We paid particular attention to this detail, so no matter the sea state, ventilation on the mast's TE is significantly reduced. The HM105 has been optimised for racing. The thickness of the submerged part of the mast is a further 1mm thinner than the HM80 and HM85, to provide maximum top-end speed. As a result this mast is not for jumping. Like the HM85, the chord length in the submerged region has been tailored to provide good upwind drive, while the chord length increases above the waterline to maximise stiffness. A more efficient underwater body shape means less drag and, hence, high and easier-to-reach top-end speed. Features15% thinnerIncreased bending and torsional stiffnessReduced dragHM80 for PronePump and DownwindHM85 all disciplinesHM105 optimised for kitefoiling and wingfoil racingMaterialsHigh Modulus Prepreg Carbon INCLUDES:  HM Mast (with gasket), Carbon Mast Cover, Screw Pack B3 (2x M8x25mm Cap screws with plastic washer for Carbon Fuselage and SS316 washer for Aluminium fuselage)

Description The NEW Universal Mast Adaptor is made of a soft, flexible material that deforms around your mast to create a solid and secure connection for your motor. ⚠️ Note: This is the Adaptor ONLY – the Universal Motor Pod is not included. If you already have a Universal Motor Pod from a previous Custom Mast Adaptor, it will be compatible with this Universal Mast Adaptor. The unique design features six sized “keys” that can be installed into the front of the adaptor, allowing fitment across different mast shapes and sizes between 90 mm and 150 mm. The user will need to test the included keys to find the correct fit for their mast and desired motor position. It is essential that the correct key size is used to allow proper clamping force between the two halves. 👉 We highly recommend watching the installation video for proper setup. Note: A very small number of masts exceed the 150 mm limit and require a custom adaptor. Known example: Neil Pryde Glide Wind. What’s Included 1x Large Nose Adaptor Piece 1x Small Nose Adaptor Piece 1x Rear Adaptor Piece 6x Keys (various sizes) ❌ Universal Motor Pod (outer pieces) not included Compatible With Universal Motor Pod

Our new high-strength pre-preg carbon fuselage is strong, durable and corrosion resistant, and weighs ~50% less than the alloy version, with equal strength and stiffness. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. The forgiving longer C700 fuselage is ideal for wing-foiling or learning to foil, offering greater stability and more control. Features High-performance carbon pre-preg construction Weighs ~50% less than the alloy version with equal strength and stiffness GeoLock tapered geometry locking system for optimised load bearing connection Hydrodynamically-optimised shape for minimal resistance Compatible with all Sonar Masts Compatible with all Sonar Front Wings Available in C600 or C700 sizes

Keep this mini Torx T40 Screwdriver with lanyard in your pocket or on your key ring for fast foil or handle setup changes and tightening. Compatible with the Sonar Foils and ShiftLock Modular Track System. WARNING: Adjustments your foil setup in the water can result in the loss of screw or gear. Due to the nature of its compact geometry please be aware that the T40 micro tool will have a reduced torque moment that can be applied to your screw’s connector. We recommend checking screw tightness regularly before and during sessions. Alway wash with fresh water after each use and ensure your T40 Tool is fully dry before packing away. FeaturesCorrosion resistantErgonomic finger gripCompatible with Sonar FoilCompatible with ShiftLock MaterialsHigh-quality SS316 with PVD-coating

This coiled calf leash with double swivels provides you with a secure connection to your foilboard. The comfortable, no-slip calf cuff helps keep the cord above the water, reducing drag and tangles with your foil system. Features Coiled calf leash keeps cord above water to reduce drag Lightweight neoprene calf cuff with stretch resistant TPU top layer Comfort cuff lining and silicon inner grip to reduce slipping Double SS316 swivels reduce tangles Easy grab finger tab for fast and safe release Strong injection-moulded velcro for light and sand-resistant hold 7mm high-grade coiled PU cord

ION's Element level represents a premium all-rounder wetsuit guaranteed to deliver a lot of bang for your buck! Offering comfort and protection in all the right places, it’s the perfect entry-level suit for keen watermen. Supple, stretchy and robust, it also includes many features from the more technical end of the range: Silk_Stuff inside lining on the upper body provides a comfortable fit and good stretch in the shoulder area. Hot_Stuff 2.0 – ION's stretchiest thermo lining – improves warmth, flexibility, and comfort even further. Element Backzip models feature additional protection pads at the shins as well as detachable leg loops to prevent water from rushing into the suit.   For Sizechart click here

Für alle Wassersport-Enthusiasten entwickelt – die elektronische Luftpumpe "Lazepump" von Duotone liefert außergewöhnliche Leistung für Kites, Wings, SUPs und mehr in einem kompakten, tragbaren Design. Schneller startklar, länger aufs Wasser! Die brandneue elektronische Luftpumpe "Lazepump" von Duotone liefert bahnbrechende Leistung für alle Wassersportfans. Dieser kompakte Kraftprotz pumpt deine Kites, Wings, SUPs und mehr effizient auf – kein mühsames manuelles Pumpen mehr, sondern maximale Zeit auf dem Wasser! Bereit, deine Pre-Session-Routine zu revolutionieren? Genau das liefert die Duotone Lazepump! Mit beeindruckender Leistung und breiter Kompatibilität mit allen aufblasbaren Produkten ist dieses Zubehör die perfekte Kombination aus Power, Präzision und Portabilität. Erlebe unvergleichlichen Komfort dank des leistungsstarken Motors, der präzise bis zu 1,4 Bar (20 PSI) aufpumpt – für optimale Steifigkeit und beste Performance. Das integrierte Filtersystem schützt vor Sand und Schmutz und verlängert die Lebensdauer der Pumpe auch unter harten Strandbedingungen. Mit nur 1,3 kg ist sie ultraleicht und passt bequem in deine Ausrüstungstasche. Dank hoher Akkueffizienz kannst du mit einer Ladung bis zu 10 Kites (9 m), 8 Wings (5 m) oder 3–5 SUPs aufpumpen. Und mit nur 2–3 Stunden Ladezeit bist du schnell wieder einsatzbereit. Für Rider, die Leistung und Komfort wollen – die elektronische Luftpumpe "Lazepump" ist die perfekte Ergänzung für dein Setup. Die beste Lösung für effizientes, präzises Aufpumpen deiner gesamten Ausrüstung.

Boom Wing | Freeride | Wave | Downwind Early lift, smooth control, balanced power The ENSIS TOPSPIN is back – reimagined for freedom, progression, and pure fun. Whether you’re carving waves, cruising on flat water, chasing downwind lines, or trying new tricks, this boom wing delivers effortless control and balanced power across all conditions. The boom gives you unlimited hand placement for intuitive steering, while the efficient profile provides early lift, stability, and smooth handling from takeoff to touchdown. TOPSPIN 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 Cutting-edge development Designer Patrick Aggeler developed the TOPSPIN using a custom design program to translate his exact vision into production. Each prototype is hand-built, ensuring precision down to the smallest detail. Perfect canopy tension After extensive testing, ENSIS achieved ideal canopy tension — key for performance, stability, and power. A combination of semi-rigid trailing edge and wingtip stabilizers keeps the canopy tight, enhancing efficiency and maintaining shape session after session. “Even in light wind, the TOPSPIN feels alive with great forward drive. It’s powerful, yet always in control.” — Eva Nora Wyss Key Features For all levels: Designed for riders from beginners to experts seeking progression. Early lift: Smooth, efficient takeoff with tight canopy for easy pumping and quick foiling. Balanced power & control: Forward drive and stable handling make one-handed riding effortless. Smooth manoeuvres: Stable overhead and responsive through transitions for intuitive riding. Light wind performance: Excellent efficiency and drive even in marginal wind conditions. Big airtime: Fast acceleration and pop for powerful jumps and long hangtime. Stable when flagged out: Reliable drift while riding waves or downwind. Boom options: Lightweight ergonomic boom, now available in carbon (blue pad) or aluminium (grey) — sold separately. Tech Features ENSIS Click Fix system: Ultra-rigid, durable boom connection. Wingtip stabilizers: Reinforced fabric for reduced flutter and improved stability. Trailing edge tension control: Stiff fabric layers maintain canopy tension and longevity. Twist-lock valve: Secure, quick inflation system. Deflate dump valve: Fast, compact deflation for easy packing. Durable, pack-approved windows: Tempered film tested for performance in all climates. Three boom sizes: 85 cm, 108 cm, 118 cm — all components clearly labelled for easy setup. Scope of Delivery Delivered as a complete wing set: high-quality adjustable backpack, hand wrist leash, and wing. Boom sold separately.

Pump Foil Entry & beyond easy take-off and pumping, effortless glide The MANIAC STRIDE is crafted to provide the easiest entry into the exhilarating experience of flying above the water. With high stability, effortless take-offs, and smooth pumping, it’s the perfect choice for anyone discovering pump foiling. Thanks to its excellent low speed lift and high efficiency, you’ll stay on the foil longer with less effort, accelerating your progression. The ultra-smooth, seemingly endless glide ensures that the MANIAC STRIDE remains enjoyable well beyond your first sessions. It is a foil that you will keep in your collection – perfect for windless days and sharing the fun with friends.  MANIAC STRIDE 2050 MANIAC Fuselage System The MANIAC STRIDE is available on the fuselage system, providing a setup that is easy to assemble, highly reliable, and built to last. The MANIAC mast connection system features an interlocking design that minimizes flex and movement between the mast and fuselage, ensuring exceptional strength and a rigid, responsive feel. The front wing is securely mounted to the fuselage, delivering direct feedback and control on the water. Compatible with all masts and stabilizers in the MANIAC foil range.